Bosch Dishwasher Reset: Troubleshooting Tips

If you’re in a bit of a pickle with your Bosch dishwasher, don’t worry! There’s a pretty simple way to reset your Bosch Dishwasher:

  • Open the door.
  • Press and hold the “Start” button for 3 seconds until the dishwasher turns off.
  • Wait for a few more seconds.
  • Press the “Start” button again to restart the dishwasher.

A soft reset is usually the first step to try for minor issues. If you’re in a hurry, try this out first.

However, if your issue is more unique like a child lock issue, a cancel drain issue or if you simply need to do a full-on reset, you’ll need to put in some more effort. 

I’ll tell you all the best ways to reset your dishwasher in this article.

Is Resetting Process Same For All Bosch Dishwasher Models?

Now, before we dive in, it’s important to know that the process may vary a bit depending on the specific model of your Bosch dishwasher. 

But don’t fret! We’ll cover the general steps here. 

Just keep in mind that consulting your dishwasher’s manual is always a good idea for model-specific instructions. 

Alright, let’s explore the different ways to reset your Bosch dishwasher.

How To Perform A Bosch Dishwasher Reset?

Resetting a Bosch dishwasher can be accomplished through various methods. Let’s take a closer look at each one.

Soft Reset and When To Do It

Soft Reset and When To Do It

Since you already know the soft reset now, when exactly should you use it? 

You can try a soft reset if you encounter the following situations with your Bosch dishwasher:

  • Your dishwasher isn’t responding to commands.
  • Error codes are popping up on the display.
  • The dishwasher isn’t completing its cycle.

How Do You Do A Hard Reset On A Bosch Dishwasher?

How Do You Do A Hard Reset On A Bosch Dishwasher

In some cases, a hard reset might be necessary to tackle more persistent issues with your Bosch dishwasher. It involves cutting off the power for a short while. 

Here’s how to do it:

  1. Unplug your dishwasher from the power source after shutting it down from the control panel.
  2. Keep it disconnected for around 10-15 minutes.
  3. Reconnect the dishwasher to the power source.

A hard reset is like a fresh start for your dishwasher, especially when the soft reset didn’t do the trick or when you’re dealing with more significant issues.

When To Do Hard Reset?

Consider a hard reset if you encounter any of the following problems with your Bosch dishwasher:

  • The dishwasher seems completely unresponsive.
  • It won’t start or turn on, no matter what you do.
  • You’re stuck with persistent error codes.

How do you do a Child Lock Reset on a Bosch dishwasher?

How do you do a Child Lock Reset on a Bosch dishwasher

If your Bosch dishwasher has a child lock feature enabled, and you want to disable it, no worries! You can perform a child lock reset. 

Here’s a simple method:

  1. Look for the “Child Lock” button on the dishwasher control panel.
  2. Press and hold the “Child Lock” button for a few seconds until the child lock indicator light turns off.

Remember to consult your dishwasher’s manual for model-specific instructions on resetting the child lock feature.

When To Do Child Lock Reset?

Perform a child lock reset whenever you want to deactivate the child lock feature and regain full control of your Bosch dishwasher.

How Do You Do A “Cancel Drain” Reset On A Bosch Dishwasher?

How Do You Do A “Cancel Drain” Reset On A Bosch Dishwasher

Is your Bosch dishwasher stuck in a drain cycle or displaying a draining error? 

No worries, I’ve got a solution for you! Just follow these steps for a cancel drain reset:

  1. Press and hold the “Start” button for about 3 seconds to cancel the current cycle.
  2. Wait for a moment or two.

Well, that’s it! Your dishwasher is ready to go. Just press the “Start” button again to kick off a new wash cycle.

When To Do “Cancel Drain” Reset?

Perform a cancel drain reset when your Bosch dishwasher isn’t draining properly or when it’s stuck in a never-ending draining cycle.

How Do You Do A Factory Reset On A Bosch Dishwasher?

If you want to wipe the slate clean and bring your Bosch dishwasher back to its original settings, a factory reset is the way to go. 

  1. Go to the breaker box and shut down the dishwasher’s circuit breaker.
  2. Keep it off for a while, for about 5-7 minutes.
  3. Turn it back on, the Dishwasher’s memory should be wiped by then

A factory reset is similar to a hard reset, except it clears out the data on an even deeper level. It’s something of a last resort, as the other resets usually do the job.

When To Perform Factory Reset?

Consider a factory reset when you want to completely reset all settings on your Bosch dishwasher or if you’re facing persistent issues that haven’t been resolved by other reset methods.

Why Should You Reset Your Bosch Dishwasher

Now, you might be wondering why you should bother resetting your Bosch dishwasher. 

Well, here’s the truth: resetting can help you solve a lot of common issues and give your dishwasher a fresh start. 

  • It can fix unresponsive buttons or control panel glitches.
  • Resetting can even clear error codes and restore normal functionality.
  • If your bosch dishwasher won’t simply start, resetting may fix it.
  • The infamous blinking red light issue on your bosch dishwasher may also be fixed with a reset. 
  • If your dishwasher isn’t completing cycles or draining properly, a reset might just save the day.

Oh, and let’s not forget about deactivating the child lock feature or restoring default settings after troubleshooting. 

Yep, resetting does it all!

FAQs

Can you reboot a dishwasher?

Yes, you can reboot a dishwasher by performing a reset.

Does resetting a Bosch dishwasher affect its warranty or service agreement?

No, resetting a Bosch dishwasher does not typically affect its warranty or service agreement.

Is it normal for a Bosch dishwasher to require frequent resets?

No, frequent resets are not normal for a Bosch dishwasher. If you find yourself needing to reset it often, it may indicate an underlying issue that should be addressed.

What should I do if my Bosch dishwasher shows an error code after resetting?

If your Bosch dishwasher displays an error code after resetting, you could try to figure out what the error means – by learning about the Diagnostic Mode, which I’ve linked below.

Final Thoughts

And there you go – now you know all the simple but vital ways to reset your Bosch Dishwasher. 

This, combined with having knowledge of the Diagnostic Mode, means that you’ll always have a fix in your backpocket when your dishwasher decides to randomly fail on you.

So you can rest assured and enjoy having your dishes washed for you in peace, without having to worry about your dishwasher going out of commission for long times.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *